Table Top Robots
Each Robot consists of an X Y (optional Z) ball screw driven Cartesian system. Each System has 2 (or 3) Smartmotors Pre-wired RS-232 serial daisy chain (and Combitronic optional).
Designed as pre-configured system of components, the Table Top Robots are ready to be controlled either via Host PC, PLC, HMI, or all stand alone with user defined downloaded programs.
3 Axis Table Top Robot
Design Features
- Highly Configurable
- 120-240VAC 50./60hz Input
- E-Stop Drive Power
- Maintained control power
- 2.5mm/rev X and Y axis, 1600 counts/mm resolution
- 5mm/rev Z axis, 800 counts/mm resolution
- 275mm/sec X or Y, 550mm/sec Z
- Up to 45Kg load on Z Axis
- Optional up to 40 channels of Universal 24V I/O
- Optional Combitronic with CANopen or DeviceNet protocol
2 Axis Table Top Robot
Design Features
- Highly Configurable
- Work area up to 600mmx550mmx250mm
- 120-240VAC 50./60hz Input
- E-Stop Drive Power
- Maintained control power
- 2.5mm/rev X and Y axis, 1600 counts/mm resolution
- 275mm/sec X or Y
- Optional up to 40 channels of Universal 24V I/O
- Optional Combitronic with CANopen or
DeviceNet protocol
2-Axis TTR (XZ Configuration)
Design Features
- Highly Configurable
- Work area up to 600mmx250mm
- 120-240VAC 50./60hz Input
- E-Stop Drive Power
- Maintained control power
- 2.5mm/rev X axis, 5mm/rev Z axis, 1600 counts/mm resolution for X axis and 800 counts/mm resolution for Z axis
- 275mm/sec X and 550mm/sec Z
- Optional up to 40 channels of Universal 24V I/O
- Optional Combitronic with CANopen or DeviceNet protocol
|
|
 |
|
 |
|
 |
|
 |
|
 |
|
